Plumbing issues are the most stressful and annoying problems you can have as a homeowner because there’s no way out; the problem has to be fixed as soon as you identify it.
While it’s essential to call a plumber as soon as you have a plumbing issue, sometimes, you can’t wait for a plumber to take care of it, especially if it’s a minor problem, such as a leaking pipe or a clogged drain.
That is why it’s essential to know a few quick fixes in advance that can help you out before a plumber comes to your rescue.
Here are the top plumbing fixes you need to know as a Freedom, CA, homeowner;
Fix #1. How to Flush Your Water Heater
The problem that causes most water heaters not to work efficiently is sediment buildup.
When sediment settles in your water tank, it causes the water heater to work harder to heat your water, resulting in the slow arrival of hot water, and sometimes the water doesn’t just warm up.
So, if you think you might be dealing with sediment buildup, you need first to turn off the water heater, then shut off the cold-water supply valve, then turn on your hot water either in a sink or a tub to drain the hot water and release the pressure from the tank.
Once that is done, attach a garden hose to the drain valve at the bottom of the water heater.
Direct the garden hose to a nearby floor drain or a large bucket, where water can drain safely, then open the cold-water valve and let the water run until all the sediments are out and your water runs clear, and just like that your water is flushed.
Fix#2. How to Turn Off Water When You Have a Leaking Pipe
Once you’ve determined where a leak comes from, the rest is usually an easy fix.
You simply need to know where the shut-off valve is located. If there’s a leak in your shower or tubs, the shut-off valve is on the wall; toilets and sinks have tiny knobs under them that are usually the shut-off valve.
Once you’ve located the shut-off valves, turn them clockwise to turn off the water.
In case you cannot pinpoint the leak’s source, it’s advised to turn off the main water supply to your home. The main shut-off valve is usually located in the outdoor water meter where the city water supply enters your home.
Fix#3. How To Fix a Leaking Pipe
Minor pipe leaks can be easily fixed using store-bought epoxy putty for leaking iron pipes and a pipe clamp for PVC and copper pipes.
It’s important to note that these are not permanent fixes; they will only stop the leakage, and you may need to replace the pipe as soon as possible.
Fix#4. How to Unclog Drains
Different methods can fix clogs. You can first use a plunger to dislodge the clog or pour a mix of baking soda and vinegar down the drain, allowing it to sit for at least 15 minutes, then flushing the drain with hot boiling water.
Additionally, you can pull up debris causing the blockage using a coat hanger or a plastic snake tool.
If the clogs are severe, you may need to wait for a plumber.
Knowing common plumbing fixes will save you a few bucks while preventing further damage. However, it’s important to note that if you’re uncomfortable carrying out these fixes, never hesitate to call a professional.
Need Plumbing Services in Freedom, CA, and the Surrounding Areas?
Tony’s Plumbing & Drain Service is your trusted partner for all your plumbing needs. We pride ourselves on delivering top-notch services, and we have 26 years in the industry to back it up.
Call us today at 831-786-0872.